Articles

HDPE Pipe for Water Supply ISO 4427 Standard

2018-11-14

HDPE pipe/HDPE pipe fittings/HDPE butt fusion fittings/ HDPE electrofusion fittings


Eolas Bunúsach

  • Ábhar: HDPE

  • Sonraíocht: Dn20-1000 for HDPE pipe, DN20-800mm for HDPE pipe fittings (DN20-630mm for HDPE electrofusion fittings, DN63-800mm for HDPE butt fusion fittings)

  • Trademark: SUNPLAST

  • Cód HS: 3917210000 for HDPE pipe, 391740000 for HDPE pipe fittings/HDPE butt fusion fittings/HDPE electrofusion fittings

  •  SDR: SDR11, SDR13.6, SDR17, SDR21 & SDR26 for HDPE pipe, SDR11 & SDR17 for HDPE pipe fittings/HDPE butt fusion fittings/HDPE electrofusion fittings

  • Tiús: 2.3-59.3mm

  • Place of Origin:  China (Mainland)

  • Loading port: Ningbo or Shanghai


Product Description

HDPE pipe for water supply


Iarratas:

Our HDPE pipes are widely used in such field as water and drainage water, dredging, transportation, environmental protection, and chemical industry etc.

Superior performance:
1. Saol seirbhíse fada: Faoi theocht agus brú rátáil, is féidir an píopa Corpoideachais a úsáid sábháilteachta ar feadh níos mó ná 50 bliain.

2. Excellent resistance to corrosion capability: Except few strong oxidants, it can endure the erosion of various kinds of chemical media, no electrochemical corrosion.

3. Excellent transportation capability: The inner side of the PE pipe is smooth and has litter abrasion and resistance. The absolute roughness k=1.01mm and "k" will not change with time.

4. Reliable joint capability: The intensity of the welded joint of PE pipes is above the pipe itself. The interface will not disconnect because of the moving of soil or the live load.

5. Reliable safety capability: HDPE pipe has strong capability of anti-cracking and is not prone to crack.

6. Better resistance to concussion capability: HDPE pipe possesses high toughness and can endure strong impact. Pressure of heavy things will not cause the pipe to break.

7. Strong toughness: HDPE pipe is a kind of pipe that possesses high toughness whose breaking elongation rate generally exceeds 500% and has strong ability to adapt to the uneven settlement of the pipe bending.

8. Solúbthacht den scoth: is féidir go n-athrófaí píopa HDPE de réir na gceanglas tógála. Tá píopa trastomhas beag ar fáil le soláthar i coil.

9. Costas suiteála níos ísle: mar thoradh ar chostas íseal tógála, meáchan éadrom, láimhseáil éasca agus a shuiteáil, teicníc táthú simplí agus díolúine ó bheith á embalmed.



Technical Parameter

All of HDPE pipe/HDPE pipe fittings/HDPE butt fusion fittings/ HDPE electrofusion fittings can fully comply with ISO4427 standard, with technical parameters as follows:


Number

Test Items

 Requirements

1

Surface críochnaigh check

       Smooth, no defect

 

2

        Dimensional check

De réir caighdeán ISO4427

3

Fadú Ag Briseadh

â ‰ ¥350%

4

Longitudinal reversion At 110℃, 1h

3% (no effect on surface)

5

An t-am ionduchtaithe ocsaídiúcháin ag 200â "ƒ

â ‰ ¥20min.

6

Melt flow rate/MFR at 190℃, 5KGS, 10min.

Change of MFR by pocessing of Â ± 20%

7

Neart hiodrálacha ag 20 ", 12.4Mpa ar feadh 100h

No failure during test period

8

Hydraulic strength at 80℃, 5.4Mpa for 165h

No failure during test period


Contact us

Téigh i dteagmháil le comhlacht Sunplast le haghaidh tuilleadh sonraí maidir le feistis píopaí píopa HDPE / HDPE / feistis comhleá gúnaí HDPE / feistis leictrimhdeasc HDPE